2024 Generac 450kVA/360KW Gaseous Generator 21.9l #SG360
Call for Price
Key Features
Availability
Brochure
Year2024
MakeGenerac
Model450kVA/360KW Gaseous Generator 21.9l #SG360
Product Features
Description
Powering Ahead
For over 50 years, Generac has led the industry with
innovative design and superior manufacturing.
Generac ensures superior quality by designing and
manufacturing most of its generator components,
including alternators, enclosures and base tanks,
control systems and communications software.
Generac’s gensets utilize a wide variety of options,
configurations and arrangements, allowing us to
meet the standby power needs of practically every
application.
Generac searched globally to ensure the most reliable
engines power our generators. We choose only engines that have already been proven in heavy-duty industrial application under adverse conditions.
Generac is committed to ensuring our customers’
service support continues after their generator
purchase.
Engine System
- Oil Drain Extension
- Air Cleaner
- Fan Guard
- Stainless Steel flexible exhaust connection
- Critical Exhaust Silencer (enclosed only)
- Factory Filled Oil
- Radiator duct adapter (open set only)
Fuel System
- Primary and Secondary Fuel Shutoff
- Flexible Fuel Line - NPT Connection
Cooling System
- Closed Coolant Recovery System
- UV/Ozone resistant hoses
- Factory-installed Radiator
- Radiator drain extension
- 50/50 Ethylene glycol antifreeze
Electrical System
- Battery charging alternator
- Battery Cables
- Battery Tray
- Solenoid activated starter motor
- Rubber-booted engine electrical connections
Alternator System
- UL2200 GENprotect™
- Class H insulation material
- 2/3 Pitch
- Skewed Stator
- Brushless Excitation
- Sealed Bearings
- Amortisseur winding
- Full load capacity alternator
Generator Set
- Internal Genset Vibration Isolation
- Separation of circuits - high/low voltage
- Separation of circuits - multiple breakers
- Wrapped Exhaust Piping
- Standard Factory Testing
- 2 Year Limited Warranty (Standby rated Units)
- 1 Year Warranty (Prime rated units)
- Silencer mounted in the discharge hood (enclosed only)
Enclousere (If Selected)
- Rust-Proof Fasteners with Nylon Washers to Protect Finish
- High Performance Sound-Absorbing Material
- Gasketed Doors
- Stamped Air-Intake Louvers
- Air discharge hoods for radiator-upward pointing
- Stainless Steel Lift Off Door Hinges
- Stainless Steel Lockable Handles
- RhinoCoat™ - Textured Polyester Powder Coat
Engine Specifications
- Make: Generac
- Cylinder #: 10
- Type: V
- Displacement - L (Cu In): 6.8 (414.96)
- Bore - mm (in): 90.17 (3.55)
- Stroke - mm (in): 105.992 (4.17)
- Compression Ratio: 9:01
- Intake Air Method: Naturally Aspirated
- Number of Main Bearings: 7
- Connecting Rods: Forged
- Cylinder: Head Aluminum
- Cylinder Liners: No
- Ignition High Energy
- Pistons: Aluminum Alloy
- Crankshaft: Steel
- Lifter Type: Overhead Cam
- Intake Valve Material: Steel Alloy
- Exhaust Valve Material: Steel Alloy
- Hardened Valve Seats: Yes
Engine Governing Specifications
- Governor: Electronic
- Frequency Regulation (Steady State): +/- 0.25%
Lubrication System Specifications
- Oil Pump Type: Gear
- Oil Filter Type: Full-flow spin-on cartridge
- Crankcase Capacity - L (qts): 5.7 (6)
Cooling System Specifications
- Cooling System Type: Pressurized Closed Recovery
- Water Pump Flow - gpm (lpm): 38 (144)
- Fan Type: Pusher
- Fan Speed (rpm): 2300
- Fan Diameter mm (in): 558 (22)
- Coolant Heater Wattage: 1500
- Coolant Heater Standard Voltage: 120 V
Fuel System Specifications
- Fuel Type: Natural Gas, Propane Vapor
- Carburetor: Down Draft
- Secondary Fuel Regulator: Standard
- Fuel Shut Off Solenoid: Standard
- Operating Fuel Pressure: 11" - 14" H2O
Engine Electrical System Specifications
- System Voltage: 12 VDC
- Battery Charging Alternator: Standard
- Battery Size: See Battery Index 0161970SBY
- Battery Voltage: 12 VDC
- Ground Polarity: Negative
Engine
| Engine Type | Generac 10 cylinders V |
| Displacement | 414.96 cu. in. (6.8 L) |
Dimensions
| Length | 111.8 in. (2839.7 mm) |
| Width | 40.5 in. (1027.8 mm) |
| Height | 55.3 in. (1405.7 mm) |
| Weight | Steel: 2370 lb. (1075 kg); Aluminum: 2074.5 lb. (941 kg) |
